-
Thermal Simulation of Heated PMMA Rear Windows
Located in
Download
/
…
/
documents
/
Material I
-
Simulation of Adhesives
Located in
Download
/
…
/
documents
/
Material I
-
INDUSTRIAL FORMING SIMULATION OF MULTI-LAYERED UD NON-CRIMP-FABRICS.
Located in
Download
/
…
/
documents
/
Material I
-
Development of a Unit Cell Model for Structural Metal Sheets using *CONSTRAINED_MULTIPLE_GLOBAL
In this paper a thin structural metal sheet is researched in regard to crashworthiness as energy absorber and a Finite Element model based on the theory of Representative Volume Element is generated. Special attention is spend to the ...
Located in
Download
/
…
/
documents
/
Prozesssimulation IV
-
Modellierungsansätze und Simulationsmethoden zur Berücksichtigung dynamischer Maschinen- eigenschaften bei der Blechumformsimulation
Located in
Download
/
…
/
documents
/
Prozesssimulation IV
-
Improved rule of mixture for determination of mechanical properties of dual phase steel with different martensite fraction
Dual phase (DP) steels are widely used materials for sheet metal applications for example in the automotive industry. They combine high strength with good ductility. Their microstructure contains two phases: soft and ductile ferrite ...
Located in
Download
/
…
/
documents
/
Prozesssimulation IV
-
Implementierung eines Thermoviskoplastizitätsmodells mit Schädigung für die simultane Kalt-/Warmumformung
For the analysis of simultaneous hot/cold forging processes, a thermoviscoplastic constitutive model is introduced, representing nonlinear isotropic and kinematic hardening, thermally activated recovery effects, strain rate ...
Located in
Download
/
…
/
documents
/
Prozesssimulation IV
-
Coupled Simulation of the Fluid Flow and Conjugate Heat Transfer in Press Hardening Processes
This presentation describes the coupled simulation of the flow through the cooling passages and the temperature distribution in blank, tool and fluid in a complete forming cycle. A completely shaped blank is used just from the ...
Located in
Download
/
…
/
documents
/
Prozesssimulation III
-
Material characterization and modelling methods for the cryogenic forming of aluminium alloys
Located in
Download
/
…
/
documents
/
Prozesssimulation III
-
Coupled Simulation of Forming and Welding with LS-DYNA for the design of Distortion-Compensation
In the past the simulation methods for forming simulation and welding structural simulation were developed respectively for themselves. This leads to the situation that forming simulation was performed with one code and welding ...
Located in
Download
/
…
/
documents
/
Prozesssimulation II
